INCINERATOR, DIESEL DRIVEN waste type : HEALTH CARE WASTE Waste calorific value : 4000KCAL/KG Moisture Content : 10-25% Nominal Capacity : 50Kg/Hour batch load Secondary Chamber : 2 Seconds @ 850degrees C The primary combustion chamber must ensure minimum exit temperature is not less than 850 degrees C. INSULATION Calcium Silicate Limiting Continuous service limit…
Read more
Items/Model TS500(PLC) Picture Principle Waste Incineration Treatment Burn Rate 150-200 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 2700L Internal Dimensions 190x120x120cm Secondary Chamber 1300L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Oil Consumption (kg/hour) Average 28 Gas Consumption (m3/hour) *** Temperature Monitor Digital Display Temperature Protection Yes Oil Tank 1400L Feed…
Read more
Items/Model TS100(PLC) Picture Principle Waste Incineration Treatment Burn Rate 60-80 kg/hour Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 1200L Internal Dimensions 120x100x100cm Secondary Chamber 600L Smoke Filter Chamber Yes(Dry Scrubber) Feed Mode Manual Voltage 220V Oil Consumption (kg/hour) Average 20.4 Gas Consumption (m3/hour) *** Temperature Monitor Digital Display Temperature Protection Yes Oil Tank 1100L…
Read more
It should be a three chambered incinerator The load capacity of 250 kg The housing for the incinerator should be able to withstand the temperatures and other operational requirements. The chimney should have a strong refractory lining of special type of cement to withstand temperatures more than 1200oc. It should have a strong base for…
Read more
A PYROLYTIC MEDICAL WASTE INCINERATOR FOR REMERA-MBOGO DISTRICT HOSPITAL An incinerator represents a complete solution to the problem of disposal of all hospital waste types. The liquid fuel is diesel. The incinerator should meet the environment standards. The final destination of this equipment is Remera-Mbogo Special Health Center in RULINDO District; bidders are requested to…
Read more
Incinerator 20 Kg Incinerator electrically operated including: A cage for receipt of biomedical waste; A combustion chamber with fireplace with a filter to retain ashes; A cover; An air supply; A turbine allowing supply air. Combustion temperature: 1800 ° C. Comes with all accessories. ▪ The incinerator should be…
Read more
incinerator suppliers.7) Burn rate: 15 – 20 Kg/h 8) Capacity: not less than 130 L 9) Concentrations of most pollutants in stack gases below detection limits 10) Diesel fuel 11) Electronic system control 12) Easy to operate and minimal training 13) Any accessory or dedicated device necessary to the proper functioning and utilization of the…
Read more
Medical waste incineration system of 300 kg/hr burn rate with dual fuel (gas and diesel) type, daily 8-16 hrs operation and a stack height of 15 meter.Primary combustion i. The primary combustion chamber shall be accepted as the primary combustion zone; ii. The minimum combustion temperature of the primary chamber shall not be less than…
Read more
Single and Dual Chamber Medical Incinerator.durable and highly efficient incinerators with various capacities for hospital/medical waste, cremation and other solid waste treatments. Chamber Double Burning Rate 10 kg per hour (for two incinerators) Burning Rate 20 kg per hour (for three incinerators) Loading Method Manual No of Burners Single for 10 kg/hour and Double…
Read more
3 Medical Waste Incinerator of 20 kg/hr capacity with dual burner.Medical Waste Incineration Systems. i’m interested to destroy about 200 kg remains. a Medical Incinerator project for Tehran municipality. Our purpose for this project is to establish a plant in order to incinerate Medical waste with 50 ton/day capacity. a incinerator with 100 kg /…
Read more